Cromonimet Steel Limited
Cromonimet Steel Limited
Girgaum, Mumbai, Maharashtra
Send E-mail
Send SMS
Home  » Our Products  » 

Carbon Steel Flanges


ASTM A350 LF1, LF2 AND LF3 Carbon/Alloy STEELSASTM A350 LF1, LF2 AND LF3 Carbon/Alloy Steel General Characteristics

These grades of steel are used as pipeline steels and also in the production of forged flanges. They are suitable for use down to –20ºF (LF1,) –50ºF (LF2) and –150ºF (LF3.)

 

Chemical Analysis:
 

LF1:

C% Mn% Si% S% P% Cr% Ni%
0.30 max 0.6/1.35 .15/.30 .040 max .035 max 0.30 max 0.40 max

LF2:

C% Mn% Si% S% P% Cr% Ni%
0.30 max 0.6/1.35 .15/.30 .040 max .035 max 0.30 max 0.40 max

 LF3:

C% Mn% Si% S% P% Cr% Ni%
0.20 max 0.90 .20/.35 .040 max .035 max 0.30 max 3.3/3.7

 

Applications:

These steels are primarily used for pipelines and for forged flanges.

 

Forging

LF1 and LF2 grades would ideally be forged at around 2250-2300ºF(1230-1260ºC) and not forged below 1650-1700ºF(900-925ºC.) LF3 grade would be forged at around 2150-2200ºF (1175-1205ºC) and not forged below 1700ºF (925ºC.)

Welding/Heat Treatment

Heat treatment of pipeline steels will no doubt be done on a continuous basis, and after welding. The structure of these steels will be initially determined by the rolling/forging process. The pipeline itself will be supplied from hot-rolled steels, the flanges etc. from forgings. The actual welding process will be primordial in ensuring the suitability and security of the pipeline and its subsequent performance. Preheat and post heat treatments are essential.


The three grades listed here are easily weldable by all tried and tested methods.




Get Best Quote

Approx. Rs 200 / Number Get Latest Price

Product Details:
Minimum Order Quantity10 Number
Size10-20 inch, 0-1 inch, >30 inch, 1-5 inch, 5-10 inch, 20-30 inch
Material StandardANSI B16.5, ASTM A351, ASTM A350 LF2, ASTM A182, ASTM A105
Rated Pressure (Bar)150# to 2500#
BrandCromonimet
ColorBlack, Silver
MaterialStainless Steel, Carbon
Product CustomizationYes

Cromonimet offer an exclusive range of Carbon Steel Forged Flanges that are made supreme quality Steel Forged Flanges.

Specifications
:
ITEMWeld Neck, Slip-On, Screwed, Socket Weld, Lap Joint, Blind, Plate.
FLANGE FACINGRaised Face, Flat Face, Lapped Joint Face, Male-Female, Tongue & Groove, Ring Joint
STANDARD150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb, 3000 PSI, BS-10 Standard Table D, E, F, H & ALSO DIN Standard.

Material:

  • ASTM A-105, IS 2002, LF2.
 

Yes! I am Interested


Get Best Quote

Approx. Rs 1,980 / Number Get Latest Price

Product Details:
Minimum Order Quantity20 Number
Size>30 inch, 0-1 inch, 20-30 inch, 1-5 inch, 5-10 inch, 10-20 inch
Material StandardASTM A351, ANSI B16.5, ASTM A105, ASTM A182
Rated Pressure (Bar)2500#
BrandCromonimet
ColorSilver, Black
MaterialCarbon Steel, Stainless Steel, Carbon
Product CustomizationYes
ShapeRound & as per drawing also

Weld Neck Flanges

We are one of the leading manufacturers, suppliers and exporters of Weld Neck Flanges.

Grades under Weld Neck Flange

Stainless Steel: 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,

Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Copper Alloys: Copper, Brass & Gunmetal

Applications

  • Chemical
  • Petrochemical
  • Refineries
  • Fertilizers
  • Power Plant
  • Nuclear Power
  • Oil & Gas
  • Paper
  • Breweries
  • Cement
  • Sugar
  • Oil Mills
  • Mining
  • Construction
  • Shipbuilding
  • Steel Plant
  • Offshore
  • Defence
  • Ports

Product Details:

BrandrancoSize0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch, >30 inchMaterial StandardASTM A105, ASTM A182, ASTM A351, ANSI B16.5Minimum Order Quantity1 Piece

Product Description:

Cromonimet Steel Ltd is manufacturers and suppliers of these world class Carbon Steel Weld neck flange (WNRF) that has been immensely used in the industrial arena and has been recommended by renowned professionals. The carbon steel weld neck flange (WNRF) are delivered to our customers keeping in mind the top notch quality of raw materials that has been procured from vendors who are known and reliable in this field. The professionals engage in guiding the whole set up and are immensely qualified as they have been associated in this field for years. These flanges have gone through stringent quality checks that enable the product to function even better. These flanges have earned a spot in the industrial front as they have achieved a recognizable platform for themselves. They are made of carbon steel which is present in the best quality possible. They are also extensively used as they are non corrosive by nature and have been cherished by top class engineers. This product stands apart as it has a long pointed focal point hub that helps in distinguishing the product from others. They are diligently packaged and are also exported to different places on demand. They are of optimum quality and are used by many people for various backgrounds dealing with this business. These flanges are also sold in bulk as they are popular in this arena.

Features:
  • Non corrosive
  • Carbon steel
  • Economical

FLANGES FORM : Carbon Steel ASTM A 105, ASTM A 181

FLANGES Size : 1/8" NB TO 48"NB.

FLANGES Class : 150, 300, 400, 600, 900, 1500 & 2500

FLANGES Grade : F42, F46, F52, F60, F65, F70

Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,850 / Number Get Latest Price

Product Details:
Size20-30 inch, 0-1 inch, 1-5 inch, 10-20 inch, 5-10 inch
Material StandardASTM A182, ASTM A351, ASTM A105, ANSI B16.5
Rated Pressure (Bar)2500
Color Black, Silver
ConditionNew
Material Alloy Steel, Stainless Steel
ShapeFlat, Curve, Rectangular

Our organization Cromonimet is a reputed name engaged in offering Socket Weld Raised Flanges in 304 / 304L / 316 / 316L Grade to the valued clients. These flanges are fabricated by making use of qualitative raw material that is sourced from the credited vendors of the market. In addition to this, we develop these flanges by meeting and maintaining the defined parameters of the industry and clients' preferences and demands. Furthermore, patrons can avail this array from us in diverse sizes and specifications to meet their requirements.

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 650 / Number Get Latest Price

Product Details:
Minimum Order Quantity5 Number
Size5-10 inch, 20-30 inch, 10-20 inch, 1-5 inch
Material StandardANSI B16.5
ColorSilver
ConditionNew
MaterialStainless Steel
ShapeFlat, Rectangular

Our organization Cromonimet is a reputed name engaged in offering Pump Flanges in 304 / 304L / 316 / 316L Grade to the valued clients. These flanges are fabricated by making use of qualitative raw material that is sourced from the credited vendors of the market. In addition to this, we develop these flanges by meeting and maintaining the defined parameters of the industry and clients' preferences and demands. Furthermore, patrons can avail this array from us in diverse sizes and specifications to meet their requirements.

Yes! I am Interested


Get Best Quote

Approx. Rs 80 / Number Get Latest Price

Product Details:
Minimum Order Quantity10 Number
Size1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
ApplicationGas Pipe, Structure Pipe, Chemical Fertilizer Pipe, Hydraulic Pipe
Thread Sizestandard
BrandCromonimet

TEST CERTIFICATE
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Carbon Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6


Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 240 / Number Get Latest Price

Product Details:
Minimum Order Quantity50 Number
BrandCromonimet
Size10-20 inch, 20-30 inch, 5-10 inch, 1-5 inch, 0-1 inch, >30 inch
Material StandardASTM A182, ASTM A234 WPB, ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L, ASTM A 815 UNS S31803, S32760, S31500, ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar)2500#

One of the Leading names in the industry, Cromonimet offer world-class array of ASTM A420 WPL6 Flanges that are acclaimed for high quality and dimensional accuracy. We offer them in varied technical specifications and have high strength. ASTM A420 WPL6 Flanges are delivered in varied technical specifications. 

 

Form:

  • Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc.
  • Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc.

Range:

Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc
Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G
Type: Seamless, Welded, Fabricated, Customised

Stainless Steel
ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L

Duplex Stainless Steel
ASTM A 815 UNS S31803, S32760, S31500

Alloy Steel
ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91

Carbon Steel
ASTM A234 WPB

Nickel Alloy
ASTM /ASME SB 336 UNS 10276 (Hastelloy C-276), ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), ASTM /ASME SB 336 UNS 4400 (Monel 400), ASTM /ASME SB 336 UNS 8020 (Alloy 20), ASTM /ASME SB 336 UNS 8825 (Inconel 825), ASTM /ASME SB 336 UNS 6600 (Inconel 600), ASTM /ASME SB 336 UNS 6601 (Inconel 601), ASTM /ASME SB 336 UNS 6625 (Inconel 625)

Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.

 

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 480 / Number Get Latest Price

Product Details:
Minimum Order Quantity10 Number
Size0-1 inch, 20-30 inch, >30 inch, 1-5 inch, 5-10 inch, 10-20 inch
Rated Pressure (Bar)150# to 2500#
BrandCromonimet
Material StandardASTM A182, ASTM A351, ANSI B16.5, ASTM A105, Stainless Steel ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L Duplex Stainless Steel ASTM A 815 UNS S31803, S32760, S31500 Alloy Steel ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91 Carbon Steel ASTM A234 WPB Nickel Alloy ASTM /ASME SB 336 UNS 10276 (Hastelloy C-276), ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), ASTM /ASME SB 336 UNS 4400 (Monel 400), ASTM /ASME SB 336 UNS 8020 (Alloy 20), ASTM /ASME SB 336 UNS 8825 (Inconel 825), ASTM /ASME SB 336 UNS 6600 (Inconel 600), ASTM /ASME SB 336 UNS 6601 (Inconel 601), ASTM /ASME SB 336 UNS 6625 (Inconel 625)

ASTM A860 WPHY Flanges Form: Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc. Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc. Range: Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G Type: Seamless, Welded, Fabricated, Customised Stainless Steel ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L Duplex Stainless Steel ASTM A 815 UNS S31803, S32760, S31500 Alloy Steel ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91 Carbon Steel ASTM A234 WPB Nickel Alloy ASTM /ASME SB 336 UNS 10276 (Hastelloy C-276), ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), ASTM /ASME SB 336 UNS 4400 (Monel 400), ASTM /ASME SB 336 UNS 8020 (Alloy 20), ASTM /ASME SB 336 UNS 8825 (Inconel 825), ASTM /ASME SB 336 UNS 6600 (Inconel 600), ASTM /ASME SB 336 UNS 6601 (Inconel 601), ASTM /ASME SB 336 UNS 6625 (Inconel 625) Test Certificate: MTC, TC from government approved Laboratory under Third Party

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 250 / Number Get Latest Price

Product Details:
Minimum Order Quantity10 Number
Size0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch, >30 inch
BrandCromonimet
Rated Pressure (Bar)150# to 2500#
Material StandardASTM A105, ASTM A182, ASTM A351, ANSI B16.5, 600 #, 2634, ND-16, 309, ASTM /ASME SB 336 UNS 8020 (Alloy 20), 304H, 904, 2573, ND-6, J, BS4504: Table ND-6, MSS-SP44 Stainless Steel ASTM A 403 WP TP 304, S31500 Alloy Steel ASTM A 234 WP-P5, H, P11, ASTM /ASME SB 336 UNS 4400 (Monel 400), 1500 # DIN: 2527, IS 1538, 321, ND-40 BS10: TABLE D, F, 316H, 316 Ti, P22, P91 Carbon Steel ASTM A234 WPB Nickel Alloy ASTM /ASME SB 336 UNS 10276 (Hostelry C-276), ASTM /ASME SB 336 UNS 6600 (Inconel 600), 317, P21, 300 #, P12, 2576, E, 347, ASTM /ASME SB 336 UNS 6625 (Inconel 625), 904L Duplex Stainless Steel ASTM A 815 UNS S31803, ASTM /ASME SB 336 UNS 8825 (Inconel 825), ANSI B16.5 & BS1560: CLASS 150 #, S32760, ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), 900 #, 2633, ND-10, 317L, 2635, ND-25, ND-40 IS6392: TABLE 5, 11, 17, P9, 316, 316L, 310, ASTM /ASME SB 336 UNS 6601 (Inconel 601)

In order to cater diverse requirements of the clients, Cromonimet offer an exceptional array of PN 10 Flanges. They are performance based and quality approved.

Form:

 

Slip-On (SORF)

Blind (BLRF)

Socket weld (SWRF),

Weld neck (WNRF),

Screwed (SERF)

Lapped Joint (LJFF)

Weld neck Ring Joint (WNRTJ)

Long Weld Neck

Orifice

Spectacle Blind

Ring Joint

Threaded

 

Range:

 

Forged Flanges: 15 Mm Nab To 600 Mm Nab

Plate Flanges: 15 Mm Nab To 1200 Mm Nab

 

Dimensions:

 

ANSI B16.5 & BS1560: CLASS 150 #, 300 #, 600 #, 900 #, 1500 #

DIN: 2527, 2573, 2576, 2633, 2634, 2635, ND-6, ND-10, ND-16, ND-40

BS10: TABLE D, E, F, H, J,

BS4504: Table ND-6, ND-10, ND-16, ND-25, ND-40

IS6392: TABLE 5, 11, 17, IS 1538, MSS-SP44

 

Stainless Steel

 

ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L

 

Duplex Stainless Steel

 

ASTM A 815 UNS S31803, S32760, S31500

 

Alloy Steel

 

ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91

 

Carbon Steel

 

ASTM A234 WPB

 

Nickel Alloy

 

ASTM /ASME SB 336 UNS 10276 (Hostelry C-276), ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), ASTM /ASME SB 336 UNS 4400 (Monel 400), ASTM /ASME SB 336 UNS 8020 (Alloy 20), ASTM /ASME SB 336 UNS 8825 (Inconel 825), ASTM /ASME SB 336 UNS 6600 (Inconel 600), ASTM /ASME SB 336 UNS 6601 (Inconel 601), ASTM /ASME SB 336 UNS 6625 (Inconel 625)

Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.

 

 


Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 200 / Number Get Latest Price

Product Details:
Minimum Order Quantity100 Number
Material StandardASTM A105, ASTM A182, ASTM A351, ANSI B16.5
Rated Pressure150# to 2500#
BrandCromonimet
FinishingPowder Coated

ANSI B16.36 Flanges Form: Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc. Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc. Range: Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G Type: Seamless, Welded, Fabricated, Customised Stainless Steel ASTM A 403 WP TP 304, 304H, 316, 316H, 316L, 316 Ti, 309, 310, 317, 317L, 321, 347, 904, 904L Duplex Stainless Steel ASTM A 815 UNS S31803, S32760, S31500 Alloy Steel ASTM A 234 WP-P5, P9, P11, P12, P21, P22, P91 Carbon Steel ASTM A234 WPB Nickel Alloy ASTM /ASME SB 336 UNS 10276 (Hastelloy C-276), ASTM /ASME SB 336 UNS 2200 (Nickel 200), ASTM /ASME SB 336 UNS 2201 (Nickel 201), ASTM /ASME SB 336 UNS 4400 (Monel 400), ASTM /ASME SB 336 UNS 8020 (Alloy 20), ASTM /ASME SB 336 UNS 8825 (Inconel 825), ASTM /ASME SB 336 UNS 6600 (Inconel 600), ASTM /ASME SB 336 UNS 6601 (Inconel 601), ASTM /ASME SB 336 UNS 6625 (Inconel 625) Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.Request Callbackwww.cromonimet.in

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Cromonimet Steel Limited
Kapil B. Vyas  (Director)
Hinglaj Bhavan, No. 33, 3rd Floor No. 36/40, Kika Street
Girgaum, Mumbai - 400004 , Maharashtra , India
Send E-mail
Share Us:
X