Get Best Quote
 |
Cromonimet Steel Limited Girgaum, Mumbai, Maharashtra |
Send E-mail
Send SMS
|
Cromonimet Steel Limited Girgaum, Mumbai, Maharashtra |
We Cromonimet Steel Ltd is one of the leading manufacturers, suppliers and exporter of Stainless Steel Round Bar.Stainless Steel Sheet.The offered range of stainless steel sheets is available in different sizes and thickness with respect to the varied demands and requirements of clients. These products are applicable in pharmaceutical companies, sugar industry, pulp & paper mills, petrochemical corporations, fabricators and fertilizer plants.
Approx. Rs 275 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Usage/Application | Automobile Industry |
| Standard | DIN, JIS, ASTM |
| Finish | Polished |
| Condition | New |
| Brand | Imported |
| Grade | 304L, 316L, 316 |
| Size | 3.2 mm width to 1500 mm width |
HALF HARD COLD ROLLED - This Type 301 - (chrome-nickel) Stainless Strip has been produced by Cromonimet to meet a need for an in-between forming Quality Strip within a hardness range calling for minimum tensile and yield strengths at 150,000 PSI and 110,000 PSI respectively with elongation in 2 inches at 15-18%. Its ductility and elongation are superior to Types 302 and 304, but it work hardens much more rapidly.
FLATNESS - Because of the wide range of widths and thicknesses and the variety of tempers produced in coils and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled stainless steel strip cannot be guaranteed.
Complete Facilities For Slitting- Edging- Length Cutting – Blanking
AISI 301
AMS 5518
ASTM A 666
Analysis
C .15 Max.
Mn 2.00 Max.
Si .750 Max.
P .040 Max.
S .030 Max.
Cr 16.00/18.00
Ni 6.00/8.00
Approx. Rs 500 / Foot Get Latest Price
| Minimum Order Quantity | 10 Foot |
| Application | Pharmaceutical / Chemical Industry, Automobile Industry, Construction, Oil & Gas Industry |
| Material | Jindal, Colombus, Imported |
| Material Grade | 304, 316, 309, 310 |
| Thickness | 0.02 mm to 100 mm |
| Brand | Cromonimet |
| Size | As per requirement |
| Diameter | 20 mm to 1500 mm |
| Shape | Square, Circle, Strip... any shape as per drawing |
The Product Available In ALL Grades & Finish
SS Sheets
SS BA Sheets
SS 2B Sheets
SS Matte Sheets
SS Mirror Sheets
SS BA PVC Sheets
SS 2B PVC Sheets
SS Matte PVC Sheets
SS Mirror PVC Sheets
SS HR Sheets
SS CR Sheets
SS 304 Sheets
SS 304 BA Sheets
SS 304 2B Sheets
SS 304 Matte Sheets
SS 304 Mirror Sheets
SS 304 BA PVC Sheets
SS 304 2B PVC Sheets
SS 304 Matte PVC Sheets
SS 304 Mirror PVC Sheets
SS 304 HR Sheets
SS 304 CR Sheets
304 SS Sheets
CR BA 304 SS Sheets
2B 304 SS Sheets
Matte 304 SS Sheets
Mirror 304 SS Sheets
BA PVC 304 SS Sheets
2B PVC 304 SS Sheets
Matte PVC 304 SS Sheets
Mirror PVC 304 SS Sheets
HR SS Sheet
AISI : 201 4%
AISI : 202 1%
AISI : 304
AISI : 304 L
AISI : 316
AISI : 316 L
AISI : 309
AISI : 310
AISI : 321
AISI : 409
AISI : 410
AISI : 420
AISI : 430
Approx. Rs 350 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Length (mm) | 5 mtr / 6 mtr / coil form |
| Width (mm) | 1 mtr to 2 mtr width |
| Finish | Mett pvc, Polished |
| Brand | Jindal |
| Grade | 300 series |
| Thickness (mm) | 1 mm to 50 mm |
| Minimum Order Quantity | 500 Kilogram |
| Grade | 200 series, 300 series, 400 series, 500 series, 600 series |
Approx. Rs 178 / Kilogram Get Latest Price
| Minimum Order Quantity | 1000 Kilogram |
| Usage/Application | Manufacturing |
| Type | Coil, Plate |
| Thickness | 1-2 mm, 2-3 mm, 3-4 mm,4-5 mm,>5mm, 0-1 mm |
| Material Grade | 301,304,316,321,347,310 |
| Steel Grade | SS316 L,SS304 L |
| Features | Strength-to-weight,advantage.,...,Ease,of,fabrication.,Impact,resistance.,Long,term,value. |
| Surface Treatment | Hot Rolled,Cold Rolled |
| Finish | 2B,CR,HR,Mirror,Met PVC |
| Brand | Jindal,Colombus |
| Payment Terms | After,Discussion |
| Single Piece Length | 3 meter,6 meter,18 meter,36 meter |
| Test Certificate | Available |
| Third Party Inspection Tip | Provided |
| Minimum Order Quantity | 100 Kilogram |
| Thickness | 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm |
| Standard | ASTM, AISI |
| Surface Treatment | Coated, Painted, Hot Rolled |
Approx. Rs 250 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Application | Automobile Industry,Construction,Pharmaceutical / Chemical Industry,Oil & Gas Industry,ONGC |
| Material | Jindal,Autokumpu,Colombus,BRG |
| Material Grade | 304,. 316,304LN,316LN,301LN,301 |
| Thickness | 1,mm,to,50 |
| Brand | As,per,TC |
| Size | 1250,1500 x 2500 / 3000 / 5000 / 6000 |
| Color | Grey |
Material : Stainless Steel
Grades: 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L 410, 420, 430, 431, 202, etc.
Standard: ASTM / ASME A/SA 240
Sheet Finishing: 2B, 2D, HR, CR, BA,Satin (Met with PVC Coated)
Sheet Plate In Form Of: Coils, foils, shim sheet, perforated sheet, hequered plate, strip, flats, blank (circle), ring (flange), etc.
Manufacturer : Jindal, Shah Alloys, Imported, etc
Specialize: Shim sheet, perforated sheet (round, square oblong hole) as per your drawing.
Approx. Rs 200 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Application | Pharmaceutical / Chemical Industry |
| Material | Jindal & Imported |
| Shape | Round & Ring form Straight |
| Material Grade | 304,316,310,321,347 |
| Thickness | 0-1 mm,1-2 mm,2-3 mm,3-4 mm,4-5 mm,>5 mm |
| Brand | Jindal,imported |
| Available Range | 0.3 mm to 150 thickness |
| Color | Grey |
| Hardness | 20 HRC to 55 |
| Specialized | Circle & Toolcut |
| Size | As per dimension by End user |
| Surface Treatment | Anealed,Pickled,Polished,Hot Rolled |
| Thickness | 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm , 4-5 mm, >5mm |
| Surface Treatment | Coated, Painted, Hot Rolled, Cold Rolled |
| Tensile Strength (Mpa) min | Yield Strength 0.2% Proof (Mpa) min | Elongation (% in 500mm) min |
| 515 | 205 | 40 |
| Element | % |
| C | 0.08max |
| Mn | 2.00max |
| Si | 0.75max |
| P | 0.045max |
| S | 0.030max |
| Cr | 18.0-20.0 |
| Ni | 8.0-10.5 |
| N | 0.10max |
| Mo | - |
Approx. Rs 250 / Kilogram Get Latest Price
| Minimum Order Quantity | 200 Kilogram |
| Size | 8 x 4,4 ft coikl |
| Steel Grade | SS 304,SS316 L,SS304 L,904L |
| Material Grade | 904L |
| Surface Treatment | Hot Rolled,CR |
| Type | Plate,Coil |
| Material | 904L,316L,304L,317L |
| Standard | ASTM,AISI |
| Thickness | 0-1 mm,1-2 mm,2-3 mm,3-4 mm,4-5 mm,>5 mm |
| Application | chemical,pharmaceutical |
Alloy 904L is a non-stabilized low carbon high alloy SS 904L Grade UNS N08904 Plates. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting/crevice corrosion and stress corrosion cracking. 904L is non-magnetic in all conditions and has excellent weld ability and form ability. The authenticate structure also gives this grade excellent toughness, even down to cryogenic temperatures.
Applications Areas:
Specifications:
Chemical Composition:
Metal | Alloy 904L |
Ni | 23 – 28 |
Mo | 4 – 5 |
Cr | 19 – 23 |
Cu | 1 – 2 |
C | 0.02 max |
Mn | 2.0 max |
Si | 1.0 max |
P | 0.045 max |
S | 0.035 max |
Standard | 904L |
UNS | N08904 |
Work staff Nr. | 1.4539 |
Mechanical & Physical Properties :
Density | 8.05 g/cm3 |
Melting Point | 1350 °C (2460 °F) |
Tensile Strength | Psi – 71000 , MPa – 490 |
Yield Strength (0.2% Offset) | Psi – 32000 , MPa – 220 |
Elongation | 35 % |
Approx. Rs 185 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Thickness | >5 mm, 4-5 mm, 3-4 mm, 1-2 mm, 0-1 mm, 2-3 mm |
| Standard | JIS, DIN, ASTM, AISI |
| Surface Treatment | Hot Rolled, Coated, Painted |
| Material Grade | 317L, 347, 321, 304, 316, 309, 310 |
| Certification | ROHS, SGS, ISO |
| Size (feet X feet) | 8 x 4, 5 x 10, 4 x 10, 5 x 8, 2 mtr x 6 mtr |
| Minimum Order Quantity | 100 Kilogram |
| Thickness | 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm, >5 mm |
| Surface Treatment | Anealed, Pickled , Polished, Hot Rolled , Cold Rolled |
Cromonimet stock stainless steel, high nickel alloy, alloy steel, carbon steel, duplex and super duplex plates and sheets.
We can also supply circles, rings, or pieces as per your sizes.
The material grade that we stock are as follows:
Austenitic: 304 - 304H - 304L - 304 Improved machinability - 316 - 316L - 316 Improved machinability - 316L Mo + - 317L - 321 - 321H - 347 - 347H - 316Ti
Super austenitic: S31254 - 904L
Heat resistant: 309S - 310S
Duplex: S32304 - S31803 - S32205- S32750 - S32760
Nickel-based alloys: N08825 - N08810 - N06625 - N04400 - N10276
Ferritic: 410S
Martensitic: A410
S235JR, S235 JR G2, S 235 J2 G3, S 275 J2 G3, S 335 J2 G3, S 355 J2 G3 C
Pressure Vessel Plates: ASME/ASTM SA/A 516-70, BS1501-223-490BLT50, BS1501-224-490B LT50, BS1501-225-490B LT50, EN10028-3 P355NL1/2, EN10028-3 P355GH
Boiler Plate Steel: ASME/ASTM SA/A 516-60, ASME/ASTM SA/A 516 – 65, EN10028-2 P265GH, BS1501-161-430A/B, EN10207 P265S, EN10028-3 P275NH
Quenched and Tempered Steel Plate: EN10025, S690QL, S890QL, S960QL
Abrasion Resistant Plate
High Yield Cold Forming Steel Plate meets specifications 700 MC and EN10149 part 2: S700MC
460 yield steel plate has excellent weldability, high strength to weight ratio significantly reducing weight of overall components A yield guaranteed 450N/mm2 and 3.2 Lloyds register.
Armour Plate material meeting international ballistic test standards. Our range has been tested according to EN1522, MIL-A 46100D and SATANAG 4569 together with other international specifications.
Chrome Moly Plate: ASTM/ASME SA/A 387 – Gr.5 Cl. 2, Gr.11 Cl.2, Gr.12 Cl.2, Gr.22 Cl.2.
Offshore & Structural Steel Plate: EN 10025 S355 J2+N, EN 10025 S355 K2+N, C/W -40 Degrees IMPACT TEST, EN10204 3.2 Lloyds.
EN 10225 S355 G3+N, EN 10225 S355 G8+N, EN 10225 S355 G10+N, THROUGH THICKNESS TESTED Z35 (at 25mm and above ) EN10204 3.2 Lloyds.
Hydrogen Induced Crack Resistant Steel Range (HIC) Tested to NACE TM 0284-03 Solution A. Available in normalised ASME/ASTM SA/A 516 grades 60/65/70. Sulphide Stress Cracking (SSC) resistance mill guaranteed. Thickness up to 200mm, plate sizes up to 12000mm x 4000mm.
Approx. Rs 232 / Kilogram Get Latest Price
| Minimum Order Quantity | 1000 Kilogram |
| Thickness | >5 mm |
| Material Grade | 316 / 316L |
| Type | Sheet & Plate, Circle & Ring |
| Steel Grade | SS316 L |
| Material | Jindal, Outokumpu, Acreinox |
| Surface Treatment | 2B Finish, CR, HR |
| Standard | ASTM |
| Shape | Rectangular |
| Type | Sheets |
| Material | SS 316L |
| Thickness | 0.3-25 mm |
Stainless Steel Sheets find extensive use in different industries for various manufacturing applications. The sheets are manufactured in compliance with ASTM/ ASME A/ SA 240 quality standards. To match with the variegated requirements of our precious client base, we offer these sheets in distinguished sizes, thicknesses and dimensions.
Features
Available Grades
Approx. Rs 1,980 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Technique | Cold Rolled |
| Size/Diameter | >4 inch |
| Single Piece Length | 3 meter |
| Size | As per requirement |
| Color | Metallic Grey |
| Usage/Application | Airplane bodies |
| Width | 3ft,4ft,5ft |
| Finishing | Polished |
Titanium Gr.5 Plates has high strength, low weight ratio and outstanding corrosion resistance inherent to titanium and its alloys has led to a wide and diversified range of successful applications which demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries. In the majority of these and other engineering applications titanium has replaced heavier, less serviceable or less cost-effective.
Specifications
Standards | Designation |
ASTM | B 265 |
ASME | SB 265 |
Approx. Rs 3,180 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Grade | C22, C276 |
| Brand | Cromonimet |
| Material Grade | C22, C276, Inconel 625 |
| Size/Diameter | >4 inch |
| Single Piece Length | 3 meter, 6 meter |
| Usage/Application | Chemical |
Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel steel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Other corrosives Hastelloy C-22 has resistance to are oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi- purpose plants where such “upset” conditions occur frequently.
This nickel alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.
Alloy C-22 should not be used in service temperatures above 1250° F due to the formation of detrimental phases which form above this temperature.
In what forms is Hastelloy C22 Available at Cromonimet?| C | Cr | Co | Fe | Mn | Mo | Ni | P | Si | S | W | V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| .010 max | 20-22.5 | 2.5 max | 2.0-6.0 | .50 max | 12.5-14.5 | Balance | .02 max | .08 max | .02 max | 2.5-3.5 | .35 max |
Although ductile enough to be formed by cold working, intermediate annealing may be necessary due to work hardening. Forging should be performed between 1750-2050° F followed by rapid cooling. Annealing can be performed at a temperature range between 2020-2150° F followed by a rapid quench. Cooling at an accelerated rate avoids the formation of detrimental phases which form between 1400-1800° F. Welding can be done by gas tungsten-arc, gas metal-arc and shielded metal-arc processes.
ASTM Specifications
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
|---|---|---|---|---|---|---|---|
| B622 | B619 | B622 | B626 | B575 | B574 | B564 | B366 |
Typical Room Temperature Tensile Properties of Annealed Material
| Product Form | Tensile (ksi) | .2% Yield (ksi) | Elongation % | Hardness (HRb) |
|---|---|---|---|---|
| Plate (.25”-1.75”) | 112 | 53 | 62 | 89 |
| Sheet (.038”-.15”) | 122 | 63 | 54 | 93 |
| Bar (.50”-5.50”) | 115 | 55 | 60 | 89 |
Approx. Rs 3,200 / Kilogram Get Latest Price
| Minimum Order Quantity | 100 Kilogram |
| Single Piece Length | 3 meter |
| Material | C22 Forged Billet,C22 Plate,C22 Sheet,C22 Weld Wire |
| Material Grade | ASME SB 574,ASME SB 575,ASME SB 619,ASME SB 619 Class I or II,ASME SB 622,ASTM B 574,ASTM B 57 |
| Thickness | 1 mm to 50 mm |
| Color | Greyish |
| Standard | As per requirement |
| Min. Yield | 53-65 |
Alloy C22 is an improved alloy for use in a range of aggressive industrial environments. Alloy C22 has excellent resistance to pitting and crevice corrosion in oxidizing and acid chloride environments, and is practically immune to chloride stress corrosion cracking (SCC). Alloy C22 has superior weldability, and alloy C22 weld fillers are used to join other corrosion resistant alloys such as Alloy C-276.
InventoryC22 Forged Billet, C22 Plate, C22 Sheet, C22 Weld Wire
Common Trade NamesAlloy C22SpecificationsASME SB 574, ASME SB 575, ASME SB 619, ASME SB 619 Class I or II, ASME SB 622, ASTM B 574, ASTM B 575, ASTM B 619, ASTM B 619 Class I or III, ASTM B 622, NACE MR0175, UNS N06022FeaturesPrice on Request: Get Latest Price
| Minimum Order Quantity | 2000 Kilogram |
| Type | Plate |
| Usage/Application | Manufacturing |
| Thickness | 3-4 mm, 1-2 mm |
| Steel Grade | SS316 L,SS304 L |
| Material Grade | 304,316 |
| Features | Non Corriosion,Hygenic |
| Surface Treatment | Coated,Hot Rolled |
| Finish | CR & HR |
| Brand | Jindal,Colombus,Bahru,Autokumpu,Posco |
| Single Piece Length | 3 meter,6 meter,18 meter |
Approx. Rs 175 / Kilogram Get Latest Price
| Minimum Order Quantity | 200 Kilogram |
| Grade | 316 SS |
| Application | Pharmaceutical / Chemical Industry, Railways, Oil & Gas Industry, Automobile Industry, Construction |
| Finish | Polished |
| Packaging Type | Box |
| Application | Construction, Fabrication, Doors, gate, Grills |
| Thickness | 1-6 mm |
| Width | 10-200 mm |
| Material | SS 202 & 304 |
| Thickness | Length | Width (size) | |||
| Available Range in mm | Tolerance in mm | Available Range in mm (Max) | Tolerance in mm (Max) | Available Range in mm | Grade |
| 0.50 - 1.50 | ± 0.05 | 2400 | 150 | 250 - 800 | 304,201,202, J4.J5, J6 |
| 1.51 - 2.00 | ± 0.05 | 1800 | 150 | ||
| 2.01 - 2.50 | ± 0.05 | 1400 | 150 | ||
| 2.51 - 4.00 | ± 0.05 | 1200 | 150 | ||
Half Hard SS 304 Strip Get Best Quote Stainless Steel 304, 304L, 316, 316L Blind Flanges Get Best Quote 304 / 304L Stainless Steel Hexagonal Bar Get Best Quote Stainless Steel 304 Pipes Get Best Quote SS 301LN Coil Get Best Quote 430 Stainless Steel Coil Get Best Quote